4.5 TONNE 2-POST CAR HOIST DUAL ELECTRIC LOCK RELEASE

TTN INDUSTRIAL 4.5 TONNE 2-POST CAR HOIST DUAL ELECTRIC LOCK RELEASE

A 4.5 tonne clear-floor 2-post hoist with dual electric lock release, built for professional workshops and serious home garages.

The TTN Industrial 4.5T 2-Post Hoist gives you 4,500 kg of lifting capacity, full access under the vehicle and a dual electric lock release. One push of a button releases the locks on both posts at the same time, so you don't need to walk around and pull cables. It's built for daily use in commercial workshops, performance shops and well-equipped home garages.

4,500 kg Lifting Capacity

Rated to lift a wide range of vehicles, including sedans, hatchbacks, SUVs, 4WDs, utes and light commercial vans.

Dual Electric Lock Release

Both posts have electric lock release. Press the button and the safety locks on both columns release together, which gives a smooth, even lowering every time.

Safe and Reliable

Dual hydraulic cylinders, automatic multi-position mechanical safety locks and anti-surge valves hold the vehicle securely at the working height you choose.

Adjustable Lifting Arms

Telescopic 2-stage arms with screw pads reach a wide range of vehicle lifting points. The long arms adjust from 890 to 1,390 mm and the short arms from 615 to 1,150 mm.

Powerful 2.2 kW Motor

Smooth, reliable lifting. It comes in single-phase 240 V or three-phase 415 V to suit your workshop's power supply.

Specifications

• Lifting capacity: 4,500 kg
• Design: 2-post clear floor
• Lock release: Dual electric (both posts)
• Safety locks: Automatic multi-position mechanical
• Lifting height: 105 mm – 1,900 mm
• Overall height: 3,900 mm
• Overall width: 3,420 mm
• Drive-through width: 2,830 mm
• Long arm length: 890 – 1,390 mm
• Short arm length: 615 – 1,150 mm
• Gross weight: 666 kg
• Motor: 2.2 kW
• Power: 215–240 V single phase or 380–415 V three phase, 50/60 Hz
• Lifting time: 50 seconds or less
• Lowering time: 20 seconds or more
• Noise level: 75 dB or less
• Included: 4 raising blocks

Before you order: Check that your ceiling height (3,900 mm overall) and floor width suit the hoist. The concrete slab must be at least 200 mm thick and rated to 21 MPa (3,000 PSI) or more. The hoist must be installed by a qualified installer.

Delivery & Installation

• A forklift or suitable unloading equipment is needed at the delivery address. We will contact you before dispatch to confirm access.
• Need an installer? We can connect you with qualified hoist installers across Australia.